• Login
CONTACT US :: 801-678-0066 :: 949-218-0026 :: SALES@ALUMINUMPIPEFITTINGS.NET

PRODUCTS

ASTM/ASME STANDARDS FOR BUTTWELDING FITTINGS

A/SA403 Stainless Steels A/SA815 Ferritic/Austenitic/Martensitic Steels
B/SB366 Nickel Alloys B/SB363 Titanium Alloys
B/SB361 Aluminum Alloys B/SB653 Zirconium

 

FITTINGS SIZES SCHEDULE
Long Radius 90 & Long Radius 45 1/2″ – 8″ sch10 – SchXXH
Long Radius 180 1/2 – 6″ sch10 – XXH
Short Radius 45, Short Radius 90, & Short Radius 180 1″ – 8″ Sch10 – XXH
CAPS 1/2″ -12″ sch10 – XXH
CONCENTRIC & ECCENTRIC REDUCERS 1/2″ – 8″ Sch10 – XXH
TEES & CROSSES (SML) & (W) 1/2″ – 14″ Sch10- XXH
LATERALS (W) and Wyes (straight and reducing) 1-1/2″ – 8″ Sch10 – 80
MULTIPLE EXTRUDED OUTLETS / HEADERS 1/2″ – 24″ Sch10 – Sch160

WP-S SEAMLESS B16.9
WP-W WELDED B16.9 X-Ray of Our Fabricated Weld
WP-WX WELDED B16.9 X-Ray of Our Fabricated Weld & Material Weld
CR WELDED MSS – SP43 Radiography Not Required

 

For pipe, fittings and flange products in Nickel, Stainless, Chrome, Titanium, CuNi Alloys and other aluminum alloys, please visit our sister site AlloyPipeFittings.net (Click the logo below)

AluminumPipeFittings.net is a division of South Coast Industrial Metals.  We offer stock from Los Angeles, CA 3003H112, 5086H32 & 6061T6 Aluminum Pipe Fittings Weld from ½” – 8″ Long Radius 90’s, Long Radius 45’s, Long Radius 180’s, Short Radius 90’s, Short Radius 180’s, Tees (Straight and Reducing) Tees and Crosses (Straight and Reducing) Caps, Concentric Reducers, Eccentric Reducers, Laterals and Wyes (Straight and Reducing)  We also offer 10″ – 48″ custom manufactured fittings, flanges and pipe.  For more information, please contact us:  RFQ@scimetals.com :: (949)218-0026

 

Limitation of Liability and Disclaimer of Warranty: In no event will South Coast Industrial Metals or any of its affiliates be liable for any damages arising from the use of the information included in this document or that it is suitable for the ‘applications’ noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. South Coast Industrial Metals, Inc. assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.